Router Set-up and Troubleshooting:

Power Cycling or Restarting

Most common Wi-Fi issues can be solved by power cycling or restarting your modem. The process is quick and does not require you to lose your home network settings.  During the restart process, you will simply power off the modem by unplugging it from the power supply, wait 30 seconds, power it back on, and restart your computer.

Reset

During a reset, your modem and router will be reset to the manufacturer’s original settings, including your Wi-Fi name and password. A reset requires using a small object, such as the tip of a pen or pin, to hold in the small reset button on the back of your modem until the lights power off and on. This also resets all of the configurations by your Internet Service Provider and requires provisioning of the device. You rarely want to do this as it will cause all of the settings to be wiped from your device, meaning your internet will be down until your Internet Service Provider can reprogram the device. Resetting certain modems or routers will require a truck roll and may result in additional charges.

Connecting Outside Services

Router

Modem

Difference Between a Router and a Modem:

Most people use their home network to access the Internet, but many have no idea how these networks work. Can you tell the difference between a modem and router? The modem connects your home to the Internet, while a router creates the network inside your house.

Short take: what’s the difference between a modem and a router?

Modem Router
  • Brings Internet to your home
  • Brings Internet to your devices
  • Has public IP address
  • Assigns local IP adresses
  • Uses a WAN network
  • Creates a LAN network

Modems bring the Internet to your home

A modem is a device that connects your home, usually through a coax cable connection, to your Internet service provider (ISP), like RTC. The modem takes signals from your ISP and translates them into signals your local devices can use, and vice versa. The connection between your house and the Internet is known as a wide area network (WAN). Each modem has an assigned public IP address that identifies it on the Internet.

Routers bring the Internet to your devices

A router connects your devices to each other and, in hard-wired setups, to the modem. The router connects to your modem and then to your devices (laptops, smart TVs, printers, etc.) via either an Ethernet cable or Wi-Fi signal. The router creates a local area network (LAN) within your house, allowing your devices to share files and peripherals like printers. The router manages all the information going to and from each device and the modem and makes sure it all ends up safely in the right spot. However, a router doesn’t need to connect to a modem to function. You can choose to create a LAN without Internet access.

Simply put, your router:

  • Assigns a local IP address to each device on the network
  • Creates a firewall to prevent security breaches
  • Manages the traffic on your network
  • Handles any Parental Controls

LED Status Indicators on Router and What They Mean

Knowing how the blinking boxes plugged into your wall work can help you to get the Internet up and running again the next time there’s a power outage or connection disruption.

Power If solid GREEN, unit is powered up and operational. If solid AMBER or RED,
please contact us and we will connect you with a technician. If flashing AMBER, the device is undergoing a software update – do not power off if in this state.
Broadband – If solid GREEN, a broadband connection has been established.

Service If solid GREEN, Internet service has been established. If solid AMBER,
the device is in “Walled Garden” mode (your browser may be redirected to our website). If solid RED, the device has failed to receive an IP address or a
PPPoE session has not been established.

Wi-Fi 2.4 GHz, Wi-Fi 5 GHz, Ethernet 1-4, Phone 1-2, USB If solid GREEN or flashing GREEN, services are provisioned or devices are connected and active.

Default Device Settings

Inserted inside the shipping carton of each Router, the inventory label (x2) provides necessary product information. This information may be attached to a work order or applied to the exterior of the device for future reference.

• Serial Number of the 844E GigaCenter Router
• ONU MAC address
• Default Wi-Fi security type
• Wi-Fi security key (WPA Key)
• Default IP address of the home gateway router (needed at initial turn-up)
• Default login credentials (User Name/Password)

Using the Command IQ App?

Just Scan the QR Code on your router for easy set-up.

FAQS

A: If the RESET button is depressed for less than 5 seconds, it resets the unit using
the current configuration settings.

A: Pressing the RESET button on the back of the unit for at least 5 seconds, or access the “Restore Defaults” reset radio button located in the “Utilities” section of the Embedded Web Interface.

A: Pressing the WPS button broadcasts the GigaCenters credentials (network
password) to other WPS capable devices for a period of 2 minutes, allowing these
devices to gain access to the wireless network.

A: Yes, the unit is set up with “WPA2 Key” Wi-Fi security. Login/password credentials
are printed on the inventory label and the product label affixed to the device.

A: Try setting up the wired connection and configuring the wireless encryption again.
Press the reset button of the wireless router for at least five seconds.
Device reverts to factory default settings custom configuration options (such as SSID names) are reset as well.

A: wireless signal degrades with distance and obstructions. Common signal impairments include walls, ceilings, metal, concrete, cinder blocks, fluorescent lights, microwaves, furniture, etc. While the GigaCenter has been optimized to provide wireless coverage for most applications, there may be dependencies based on
the location where the device is installed. Please contact us for troubleshooting assistance.

A: The 844E should be installed using the tabletop stand or wall mount bracket to ensure best Wi-Fi performance and proper fiber optic cable management. Ensure the Ethernet cable can be properly routed to the device without excessive bends or pinching of the cable.

A: Disconnect the Ethernet WAN cable between the router and the 844E running in
WAP mode. Once disconnected, the IP address http://192.168.1.1 can again be
accessed using the Ethernet LAN port.

A: Follow the online Quick Start menu Configure Wireless Network and change the
Network Name and WPA/WPA2 Password to be the same as the wireless gateway.
Note that changes will apply to both the 2.4 GHz and 5 GHz radios. To change
each radio separate, use the Wireless menu SSID Setup and Security tabs.